24 X 7 Help Line 24 x 7 Help Line : B L Sharma +91 9308424649, Sanjay +91 9204396140, Bhushan +91 9334617701, Awadesh +91 9308391066
  Wet Mix Macadam Plant (WMM) / Soil Stabilization Plant  


SHREERAM is committed to manufacture and supply absolute best Wet Mix / Soil Stabilization Plant as per MORTH specification based on latest technology meeting both Indian and International standards to produce high quality homogeneous mix of soil, aggregate and filler material with required moisture content for making base/sub-base surface of the roads.

Salient Features :
- Superior quality with latest technology.
- High Production rate.
- Simple operation and easy maintenance.
- Manufactured from high quality raw materials.
- Use of standard and reputed parts.
- Site installation, operational training and prompt after sales service support.


The main assemblies of the machine are:

Four bin feeder : It is a single design chassis having 4 individual bins fitted with feeder conveyor and discharge gate with adjustable opening for feeding different size of aggregates from each bin on to the gathering conveyor.

Gathering conveyor : It receives aggregates discharged from each bins and discharges continuously on to vibrating screen.

Vibrating screen : It removes odd size of unwanted aggregates and allow to fall usable size of aggregates on to slinger conveyor.

Slinger conveyor : It feeds the screened aggregate into pug mill mixer unit.

Pug mill : A twin square-shaft designed steel fabricated pug mill housing fitted with wear resistant liner and a set of mixing arms fitted on square-shaft is provided for producing a homogeneous mix soil, aggregate and minerals with controlled quantity of moistures.

Mineral filler unit : It feeds controlled quantity of fine dust minerals into pug mill mixer unit by force of air stream.

Load out conveyor : It is fixed to inclined position which receives ready mix material discharged from pug mill and in turns discharges the same into tipping truck through hydraulically operated gob hopper.

Water tank with pump unit : A steel fabricated tank with inlet and outlet device is provided for storage of water. The water pump installed with the tank supplies controlled amount of water as required to the pug mill mixer.

Operational control cabin : An air conditioned steel fabricated cabin with better interior finishing and fitted transparent window glass is provided for operating the plant by sitting the operator inside the cabin.

Electronic control panel : A microprocessor based electronic control panel base on latest technology and requirements is installed inside the cabin for complete operation of the plant.

OPTIONAL : Storage silo
Technical Specification of Wet Mix Macadam Plant


SWM – 100 SWM – 160


100 TPH 160 TPH

4-bin capacity

4x10 MT 4x12 MT

Gathering belt width

600 mm 600 mm

Slinger conveyor width

600 mm 600 mm

Pug mill capacity

1.6 cu.m 1.9 cu.m

Nos. of mixing arms

26 nos 32 nos
Water tank capacity 15 kl 20 kl

Mineral filler hopper capacity

1.5 MT 2 MT
Power requirement    

4-bin feeder

4 x 1.5 hp 4 x 2 hp

Gathering, Slinger and load out Conveyor

5 hp 5 hp
Vibratory screen 1 hp 1 hp

Pug mill

30 hp 50 hp

Hydraulic power pack

3 hp 3 hp
Water pump 2 hp 3 hp

Air blower

2 hp 3 hp

Note : As per company policy of continuous improvement, any of the above specifications subject to change without notice.